How to Clean Dyson Vacuum Filter

How to Clean Dyson Vacuum Filter

Regularly cleaning your Dyson vacuum filter is essential to maintain its suction power and prolong the life of your vacuum. Dyson filters are washable and designed to trap dust, allergens, and other particles, ensuring your vacuum operates efficiently. Follow these steps to clean your Dyson vacuum filter properly.


Why Clean the Filter?

  1. Maintain Suction Power: A clogged filter reduces airflow, leading to diminished performance.
  2. Improve Air Quality: Clean filters trap allergens and dust effectively.
  3. Extend Vacuum Life: Regular maintenance prevents strain on the motor.

How Often Should You Clean a Dyson Filter?

  • Clean the filter every 1–3 months, depending on usage.
  • For homes with pets or heavy vacuuming, consider cleaning it more frequently.

What You’ll Need

  • Cold water
  • Sink or basin
  • Towel for drying

Step-by-Step Cleaning Instructions

1. Turn Off and Unplug the Vacuum

  • Why? Ensures safety while removing and handling the filter.
  • How? Switch off the vacuum and unplug it from the electrical outlet.

2. Remove the Filter

  • Why? Dyson vacuums typically have one or more filters located in the cyclone assembly or near the motor.
  • How?
    • Refer to your Dyson model’s manual for exact filter locations.
    • Twist or pull the filter out gently.

3. Rinse the Filter Under Cold Water

  • Why? Removes trapped dust and debris.
  • How?
    • Hold the filter under cold running water, avoiding the use of detergents or hot water as they can damage the filter.
    • Gently squeeze the filter to release dirt while rinsing.
    • Repeat until the water runs clear.

4. Shake Off Excess Water

  • Why? Prepares the filter for air drying.
  • How?
    • Shake the filter over the sink to remove as much water as possible.
    • Avoid wringing or twisting the filter to prevent damage.

5. Let the Filter Air Dry

  • Why? Ensures the filter is completely dry to avoid mold or damage.
  • How?
    • Place the filter on a towel in a well-ventilated area.
    • Allow it to air dry for at least 24 hours. Do not use a dryer, microwave, or direct heat source.

6. Reinstall the Filter

  • Why? A properly cleaned and dried filter restores optimal performance.
  • How?
    • Once the filter is completely dry, reinsert it into the vacuum.
    • Ensure it fits securely before using the vacuum.

Tips for Cleaning Dyson Filters

  1. Don’t Use Detergents: Soaps and cleaning agents can degrade the filter material.
  2. Avoid Direct Sunlight: Let the filter air dry naturally without exposing it to direct sunlight or high heat.
  3. Clean Both Filters (If Applicable): Some Dyson models have a pre-motor and a post-motor filter. Clean both for maximum efficiency.
  4. Check the Manual: Always refer to your Dyson model’s user guide for specific instructions.

When to Replace the Filter

  • Replace the filter if it shows signs of wear, damage, or persistent odors even after cleaning.
  • Dyson filters typically last 12–18 months, depending on usage and care.

By following these steps and maintaining a regular cleaning schedule, your Dyson vacuum will perform at its best, ensuring clean floors and fresh air in your home.

Share the Post:

Related Posts